by adrian | Jul 21, 2021 | Wipers
The profile is held in place via the outside lip and the retainer nose. Made in hard plastics (POM, PEEK, etc.) or hard grade PU which ensures high stiffness, breaking strength and stability. Good dry running properties. Not suitable for pressure from the trailing...
by adrian | Jul 21, 2021 | Wipers
The profile is designed with interference on the OD which provides a good static fit, preventing the entry of humidity and other contamination via the outside diameter. The design of the wiper lip supports the recirculation of the remaining oil film into the cylinder,...
by adrian | Jul 21, 2021 | Wipers
The profile is designed with interference on the OD which provides a good static fit, preventing the entry of humidity and other contamination via the outside diameter. The design of the wiper lip supports the recirculation of the remaining oil film into the cylinder,...
by adrian | Jul 21, 2021 | Wipers
The profile is designed with two geometrically different lips for wiping off any dirt on the rod and to reduce the residual oil film on the media side. The wiper consists of a PTFE wiping part and an O-Ring as preload element, maintaining contact pressure on the rod....
by adrian | Jul 21, 2021 | Wipers
The profile is designed with two geometrically different lips for wiping off any dirt on the rod and to reduce the residual oil film on the medium side. The wiper consists of a PTFE wiping part and an O-Ring as preload element, maintaining contact pressure on the rod....
by adrian | Jul 21, 2021 | Wipers
The profile is designed with one sharp lip for wiping off any dirt on the rod. The residual oil film is recovered. The wiper consists of a PTFE wiping part and an O-Ring as preload element, maintaining contact pressure on the rod. Due to the use of an O-Ring the wiper...
