OS01
The profile is designed with interference on the OD which provides a good static fit, preventing the entry of humidity and other contamination via the outside diameter. Tight seat in the housing and an additional retainer ring in hard plastic or Aluminium / Steel ensures that the seal is held in place. Tension spring for increasing the bonding force. Not suitable for high pressure from the trailing side.
-30°C to +105°C
-25°C to +100°C
-20°C to +210°C
5 m/s
10 m/s
15 m/s
0.5 bar/7 PSI
0.5 bar/7 PSI
0.5 bar/7 PSI
PU Red U203-95
NBR 85 N107-85
FPM 85 F109-BR85
POM P101-WE NBR 70
POM P101-WE NBR 70
PTFE-25% Carbon T125-C25
OS02
The profile is designed with interference on the OD which provides a good static fit, preventing the entry of humidity and other contamination via the outside diameter. Additional dust lip for protecting the sealing lip. Tight seat in the housing and an additional retainer ring in hard plastic or Aluminium / Steel ensures that the seal is held in place. Tension spring for increasing the bonding force. Not suitable for high pressure from the trailing side.
-30°C to +105°C
-25°C to +100°C
-20°C to +210°C
5 m/s
10 m/s
15 m/s
0.5 bar/7 PSI
0.5 bar/7 PSI
0.5 bar/7 PSI
PU Red U203-95
NBR 85 N107-85
FPM 85 F109-BR85
POM P101-WE NBR 70
POM P101-WE NBR 70
PTFE-25% Carbon T125-C25
OS08
The profile is designed with interference on the OD which provides a good static fit, preventing the entry of humidity and other contamination via the outside diameter. Springless preloaded sealing lip which enables a compact design. Small friction and low heat build-up. Not suitable for pressure from the trailing side.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
5 m/s
7 m/s
10 m/s
10 m/s
10 m/s
N/A
N/A
N/A
N/A
N/A
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
R03
Symmetrical, double acting rotary seal for high pressures and low speeds, designed with interference on the OD which provides a good static fit in the groove. Dynamic sealing on the ID. Backup elements on the left and right side for maintaining the function also at large sealing gaps. Excellent static and dynamic sealing performance.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.2 m/s
0.2 m/s
0.2 m/s
0.2 m/s
0.2 m/s
400 bar/5800 psi
400 bar/5800 psi
200 bar/2900 psi
200 bar/2900 psi
200 bar/2900 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
POM P101-WE NBR 70
POM P101-WE NBR 70
POM P101-WE NBR 70
PEEK PK100-CN FPM 75
PEEK PK100-CN FPM 75
R04
Symmetrical, double acting rotary seal, designed with interference on the OD which provides a good static fit in the groove. Dynamic sealing on the ID. Excellent static and dynamic sealing performance. Low friction.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.2 m/s
0.2 m/s
0.2 m/s
0.2 m/s
0.2 m/s
160 bar/2300 psi
160 bar/2300 psi
100 bar/1400 psi
100 bar/1400 psi
100 bar/1400 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
R04A
Symmetrical, double acting rotary seal, designed with interference on the OD which provides a good static fit in the groove. Dynamic sealing on the ID. Excellent static and dynamic sealing performance. Low friction.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.2 m/s
0.2 m/s
0.2 m/s
0.2 m/s
0.2 m/s
160 bar/2300 psi
160 bar/2300 psi
100 bar/1400 psi
100 bar/1400 psi
100 bar/1400 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
R05
Symmetrical, double acting rotary seal, designed with interference on the ID which provides a good static fit in the groove. Dynamic sealing on the OD. Excellent static and dynamic sealing performance. Low friction.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.2 m/s
0.2 m/s
0.2 m/s
0.2 m/s
0.2 m/s
160 bar/2300 psi
160 bar/2300 psi
100 bar/1400 psi
100 bar/1400 psi
100 bar/1400 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
R05A
Symmetrical, double acting rotary seal, designed with interference on the ID which provides a good static fit in the groove. Dynamic sealing on the OD. Excellent static and dynamic sealing performance. Low friction.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.2 m/s
0.2 m/s
0.2 m/s
0.2 m/s
0.2 m/s
160 bar/2300 psi
160 bar/2300 psi
100 bar/1400 psi
100 bar/1400 psi
100 bar/1400 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
VR06
Rotary seal, designed with interference on the ID which provides a good static fit on the shaft and ensures the seal rotates with the shaft. Axial dynamic sealing lip vertical to the rod. Small contact pressure of the sealing lip that enables also 'dry running'. Low friction on the sealing lip - decreasing with the rotation speed as a result of the centrifugal force. Little abrasion and long lifetime. Ensurance of sealing also at eccentric rods or rod misalignments. Pressure must be avoided.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
25 m/s
25 m/s
25 m/s
25 m/s
25 m/s
N/A
N/A
N/A
N/A
N/A
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
VR07
Rotary seal, designed with interference on the ID which provides a good static fit on the shaft and ensures the seal rotates with the shaft. Axial dynamic sealing lip vertical to the rod. Small contact pressure of the sealing lip that enables also 'dry running'. Low friction on the sealing lip - decreasing with the rotation speed as a result of the centrifugal force. Little abrasion and long lifetime. Ensures of sealing also at eccentric rods or rod misalignments. Pressure must be avoided.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
25 m/s
25 m/s
25 m/s
25 m/s
25 m/s
N/A
N/A
N/A
N/A
N/A
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
R08
Asymmetrical, double acting rotary seal for inside sealing, designed with interference of the O-Ring on the OD and no interference of the glide ring on the ID. Excellent sealing performance at low speeds with high pressure. No tendency to “stick-slip” effect. Low break-away load after long standstills. Good extrusion resistance.
-30°C to +105°C
-60°C to +80°C
-20°C to +210°C
-20°C to +210°C
-20°C to +210°C
0.4 m/s
0.4 m/s
0.4 m/s
0.4 m/s
0.4 m/s
350 bar/5000 psi
350 bar/5000 psi
350 bar/5000 psi
350 bar/5000 psi
350 bar/5000 psi
PU 57 MoS2 Grey U203-GM95
UHMWPE
PTFE T101-W
PTFE-40% Bronze T120-BR40
PTFE-25% Carbon T125-C25
NBR 70
NBR 70
FPM 75
FPM 75
FPM 75
R08D
Asymmetrical, double acting rotary seal for inside sealing, designed with interference of the O-Ring on the OD and no interference of the glide ring on the ID. Excellent sealing performance at low speeds with high pressure. No tendency to “stick-slip” effect. Low break-away load after long standstills. Good extrusion resistance.
-30°C to +105°C
-60°C to +80°C
-20°C to +210°C
-20°C to +210°C
-20°C to +210°C
0.4 m/s
0.4 m/s
0.4 m/s
0.4 m/s
0.4 m/s
350 bar/5000 psi
350 bar/5000 psi
350 bar/5000 psi
350 bar/5000 psi
350 bar/5000 psi
PU 57 MoS2 Grey U203-GM95
UHMWPE
PTFE T101-W
PTFE-40% Bronze T120-BR40
PTFE-25% Carbon T125-C25
NBR 70
NBR 70
FPM 75
FPM 75
FPM 75
R09
Asymmetrical, double acting rotary seal for inside sealing, designed with interference of the O-Ring on the OD and no interference of the glide ring on the ID. Excellent sealing performance at low speeds with high pressure. Peripheral grooves that enable the build up of a lubricant reservoir. No tendency to “stick-slip” effect. Low break-away load after long standstills. Good extrusion resistance.
-30°C to +105°C
-60°C to +80°C
-20°C to +210°C
-20°C to +210°C
-20°C to +210°C
0.4 m/s
0.4 m/s
0.4 m/s
0.4 m/s
0.4 m/s
350 bar/5000 psi
350 bar/5000 psi
350 bar/5000 psi
350 bar/5000 psi
350 bar/5000 psi
PU 57 MoS2 Grey U203-GM95
UHMWPE
PTFE T101-W
PTFE-40% Bronze T120-BR40
PTFE-25% Carbon T125-C25
NBR 70
NBR 70
FPM 75
FPM 75
FPM 75
R09A
Asymmetrical, double acting rotary seal for inside sealing, designed with interference of the preload element on the OD and no interference of the glide ring on the ID. Excellent sealing performance at low speeds with high pressure. Peripheral grooves that enable the build up of a lubricant reservoir. No tendency to “stick-slip” effect. Low break-away load after long standstills. Good extrusion resistance. Especially for use in non standardized grooves.
-30°C to +105°C
-60°C to +80°C
-20°C to +210°C
-20°C to +210°C
-20°C to +210°C
0.4 m/s
0.4 m/s
0.4 m/s
0.4 m/s
0.4 m/s
350 bar/5000 psi
350 bar/5000 psi
350 bar/5000 psi
350 bar/5000 psi
350 bar/5000 psi
PU 57 MoS2 Grey U203-GM95
UHMWPE
PTFE T101-W
PTFE-40% Bronze T120-BR40
PTFE-25% Carbon T125-C25
NBR 85
NBR 85
FPM 85
FPM 85
FPM 85
R10
Asymmetrical, double acting rotary seal for outside sealing, designed with interference of the O-Ring on the ID and no interference of the glide ring on the OD. Excellent sealing performance at low speeds with high pressure. Peripheral grooves that enable the build up of a lubricant reservoir. No tendency to “stick-slip” effect. Low break-away load after long standstills. Good extrusion resistance.
-30°C to +105°C
-60°C to +80°C
-20°C to +210°C
-20°C to +210°C
-20°C to +210°C
0.4 m/s
0.4 m/s
0.4 m/s
0.4 m/s
0.4 m/s
350 bar/5000 psi
350 bar/5000 psi
350 bar/5000 psi
350 bar/5000 psi
350 bar/5000 psi
PU 57 MoS2 Grey U203-GM95
UHMWPE
PTFE T101-W
PTFE-40% Bronze T120-BR40
PTFE-25% Carbon T125-C25
NBR 70
NBR 70
FPM 75
FPM 75
FPM 75
R10A
Asymmetrical, double acting rotary seal for outside sealing, designed with interference of the preload element on the ID and no interference of the glide ring on the OD. Excellent sealing performance at low speeds with high pressure. Peripheral grooves that enable the build up of a lubricant reservoir. No tendency to “stick-slip” effect. Low break-away load after long standstills. Good extrusion resistance. Especially for use in non standardized grooves.
-30°C to +105°C
-60°C to +80°C
-20°C to +210°C
-20°C to +210°C
-20°C to +210°C
0.4 m/s
0.4 m/s
0.4 m/s
0.4 m/s
0.4 m/s
350 bar/5000 psi
350 bar/5000 psi
350 bar/5000 psi
350 bar/5000 psi
350 bar/5000 psi
PU 57 MoS2 Grey U203-GM95
UHMWPE
PTFE T101-W
PTFE-40% Bronze T120-BR40
PTFE-25% Carbon T125-C25
NBR 85
NBR 85
FPM 85
FPM 85
FPM 85
R11
Asymmetrical, double acting rotary seal for outside sealing, designed with interference of the O-Ring on the ID and no interference of the glide ring on the OD. Excellent sealing performance at low speeds with high pressure. No tendency to “stick-slip” effect. Low break-away load after long standstills. Good extrusion resistance.
-30°C to +105°C
-60°C to +80°C
-20°C to +210°C
-20°C to +210°C
-20°C to +210°C
0.4 m/s
0.4 m/s
0.4 m/s
0.4 m/s
0.4 m/s
350 bar/5000 psi
350 bar/5000 psi
350 bar/5000 psi
350 bar/5000 psi
350 bar/5000 psi
PU 57 MoS2 Grey U203-GM95
UHMWPE
PTFE T101-W
PTFE-40% Bronze T120-BR40
PTFE-25% Carbon T125-C25
NBR 70
NBR 70
FPM 75
FPM 75
FPM 75
RS19A
Asymmetrical, single acting rotary seal with clamping flange. Preload effected through V-spring. Dynamic sealing lip shorter than static lip to avoid drag pressure. Excellent static and dynamic sealing performance. Useable for short and long stroke lengths. Low friction in dry running or poor lubrication conditions, no stick-slip effect.
-200°C to +80°C
-200°C to +260°C
-200°C to +260°C
-200°C to +260°C
2 m/s
2 m/s
2 m/s
2 m/s
150 bar/2200 psi
150 bar/2200 psi
150 bar/2200 psi
150 bar/2200 psi
UHMWPE
PTFE T101-W
PTFE-40% Bronze T120-BR40
PTFE-25% Carbon T125-C25
PS19A
Asymmetrical, single acting rotary seal with clamping flange. Preload effected through V-spring. Dynamic sealing lip shorter than static lip to avoid drag pressure. Excellent static and dynamic sealing performance. Useable for short and long stroke lengths. Low friction in dry running or poor lubrication conditions, no stick-slip effect.
-200°C to +80°C
-200°C to +260°C
-200°C to +260°C
-200°C to +260°C
2 m/s
2 m/s
2 m/s
2 m/s
150 bar/2200 psi
150 bar/2200 psi
150 bar/2200 psi
150 bar/2200 psi
UHMWPE
PTFE T101-W
PTFE-40% Bronze T120-BR40
PTFE-25% Carbon T125-C25