RS01
Asymmetrical, single acting rod seal, designed with interference on the OD which provides a good static fit in the groove. Dynamic sealing lip shorter than static lip to avoid drag pressure. Excellent static and dynamic sealing performance. Useable for long stroke lengths. Negligible tendency to “stick-slip” effect above a speed of 0.15 m/s. For lower speeds the dynamic lip should be redesigned (shorter, stiffer).
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
400 bar/5800 psi
400 bar/5800 psi
150 bar/2200 psi
150 bar/2200 psi
150 bar/2200 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
RS01A
Asymmetrical, single acting rod seal, designed with interference on the OD which provides a good static fit in the groove. Wider groove and softer lips compared to RS01. Dynamic sealing lip shorter than static lip to avoid drag pressure. Excellent static and dynamic sealing performance. Useable for long stroke lengths. Negligible tendency to “stick-slip” effect above a speed of 0.15 m/s.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
160 bar/2300 psi
160 bar/2300 psi
160 bar/2300 psi
160 bar/2300 psi
160 bar/2300 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
RS01B
Asymmetrical, single acting rod seal, designed with interference on the OD which provides a good static fit in the groove. Dynamic sealing lip shorter than static lip to avoid drag pressure. Sharp lips on ID and OD. Good static and dynamic sealing performance. Good performance in low pressure conditions. Useable for long stroke lengths. Out-of date profile sealing that causes a relatively thick oil film.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
400 bar/5800 psi
400 bar/5800 psi
150 bar/2200 psi
150 bar/2200 psi
150 bar/2200 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
150 bar/2200 psi
FPM 85 F109-BR85
RS02
Asymmetrical, single acting rod seal with integrated back-up ring, designed with interference on the OD which provides a good static fit in the groove. Dynamic sealing lip shorter than static lip to avoid drag pressure. Excellent static and dynamic sealing performance. Useable for long stroke lengths. Negligible tendency to “stick-slip” effect above a speed of 0.15 m/s. For lower speeds the dynamic lip should be redesigned (shorter, stiffer). Activated back-up ring prevents and reduces extrusion.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
700 bar/10.000 psi
700 bar/10.000 psi
300 bar/4300 psi
300 bar/4300 psi
300 bar/4300 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
POM P101-WE
POM P101-WE
POM P101-WE
PEEK PK100-CN
PEEK PK100-CN
RS02A
Asymmetrical, single acting rod seal with integrated back-up ring, designed with interference on the OD which provides a good static fit in the groove. Dynamic sealing lip shorter than static lip to avoid drag pressure. Excellent static and dynamic sealing performance. Useable for long stroke lengths. Negligible tendency to “stick-slip” effect above a speed of 0.15 m/s. For lower speeds the dynamic lip should be redesigned (shorter, stiffer). Activated back-up ring prevents and reduces extrusion.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
700 bar/10.000 psi
700 bar/10.000 psi
300 bar/4300 psi
300 bar/4300 psi
300 bar/4300 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
POM P101-WE
POM P101-WE
POM P101-WE
PEEK PK100-CN
PEEK PK100-CN
RS02B
Asymmetrical, single acting rod seal, designed with interference on the OD which provides a good static fit in the groove. Dynamic sealing lip shorter than static lip to avoid drag pressure. Improved sealing performance in pressureless condition because of the glide ring on the ID. Excellent static and dynamic sealing performance. Useable for long stroke lengths. Negligible tendency to “stick-slip” Activated back-up ring prevents and reduces extrusion.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
700 bar/10.000 psi
700 bar/10.000 psi
300 bar/4300 psi
300 bar/4300 psi
300 bar/4300 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
POM P101-WE
POM P101-WE
POM P101-WE
PEEK PK100-CN
PEEK PK100-CN
RS03
Asymmetrical, single acting rod seal, designed with interference on the OD which provides a good static fit in the groove. Dynamic sealing lip shorter than static lip to avoid drag pressure. Increased preload due to an additional O-Ring. Excellent static and dynamic sealing performance. Excellent performance in all pressure ranges. Used for short, pulsating strokes. No reverse leakage when changing direction. Recommended for positioning or holding under pressure.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to 210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
400 bar/5800 psi
400 bar/5800 psi
150 bar/2200 psi
150 bar/2200 psi
150 bar/2200 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
NBR 70
NBR 70
NBR 70
FPM 75
FPM 75
RS04
Asymmetrical, single acting rod seal, designed with interference on the OD which provides a good static fit in the groove. Dynamic sealing lip shorter than static lip to avoid drag pressure. Increased preload due to an additional O-Ring. Activated back-up ring prevents and reduces gap extrusion. Excellent static and dynamic sealing performance. Excellent performance in all pressure ranges. Used for short, pulsating strokes. No reverse leakage when changing direction. Recommended for positioning or holding under pressure.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
700 bar/10.000 psi
700 bar/10.000 psi
300 bar/4300 psi
300 bar/4300 psi
300 bar/4300 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
POM P101-WE NBR 70
POM P101-WE NBR 70
POM P101-WE NBR 70
PEEK PK100-CN FPM 75
PEEK PK100-CN FPM 75
RS05
Asymmetrical, single acting rod seal for pneumatic applications, designed with interference on the OD which provides a good static fit in the groove. Special designed sealing lip to retain the lubrication film and prevent dry running. Excellent static and dynamic sealing performance. Useable for long stroke lengths. Negligible tendency to “stick-slip”, small break-away loads after long standstill.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
25 bar/350 psi
25 bar/350 psi
25 bar/350 psi
25 bar/350 psi
25 bar/350 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
RS08
Symmetrical, single acting rod seal, designed with interference on the OD which provides a good static fit in the groove. Special design for small cross sections where lips would be too thin. Excellent static and dynamic sealing performance. Excellent performance over all pressure ranges. Used for short pulsating strokes. No reverse leakage when changing direction. Recommended for positioning or holding under pressure. Particularly suitable for high viscosity media.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
400 bar/5800 psi
400 bar/5800 psi
150 bar/2200 psi
150 bar/2200 psi
150 bar/2200 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
RS09
Asymmetrical, single acting rod seal, designed with interference of the O-Ring on the OD and slight interference of the glide ring on the ID. Excellent sealing performance in low and high speeds. Suitable for positioning functions. Negligible tendency to “stick-slip” effect, good sliding properties. Low break-away load after long standstills. Excellent gap extrusion resistance due to the free space on the trailing side.
-30°C to +105°C
-30°C to +105°C
-60°C to +80°C
-20°C to +210°C
-20°C to +210°C
10 m/s
10 m/s
10 m/s
10 m/s
10 m/s
250 bar/3600 psi
400 bar/5800 psi
400 bar/5800 psi
400 bar/5800 psi
400 bar/5800 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
UHMWPE
PTFE T101-W
PTFE-25% Carbon T125-C25
NBR 70
NBR 70
NBR 70
FPM 75
FPM 75
RS09A
Symmetrical, double acting rod seal, designed with interference of the O-Ring on the OD and slight interference of the glide ring on the ID. Excellent sealing performance in low and high speeds. Suitable for positioning functions. Negligible tendency to “stick-slip” effect, good sliding properties. Low break-away load after long standstills. Excellent extrusion resistance.
-30°C to +105°C
-30°C to +105°C
-60°C to +80°C
-20°C to +210°C
-20°C to +210°C
10 m/s
10 m/s
10 m/s
10 m/s
10 m/s
250 bar/3600 psi
400 bar/5800 psi
400 bar/5800 psi
400 bar/5800 psi
400 bar/5800 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
UHMWPE
PTFE T101-W
PTFE-25% Carbon T125-C25
NBR 70
NBR 70
NBR 70
FPM 75
FPM 75
RS09B
Asymmetrical, single acting rod seal, designed with interference of the O-Ring on the OD and slight interference of the glide ring on the ID. Excellent sealing performance in low and high speeds. Suitable for positioning functions. Negligible tendency to “stick-slip” effect, good sliding properties. Low break-away load after long standstills. Excellent extrusion resistance due to the free space on the trailing side.
-30°C to +105°C
-30°C to +105°C
-60°C to +80°C
-20°C to +210°C
-20°C to +210°C
10 m/s
10 m/s
10 m/s
10 m/s
10 m/s
250 bar/3600 psi
400 bar/5800 psi
400 bar/5800 psi
400 bar/5800 psi
400 bar/5800 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
UHMWPE
PTFE T101-W
PTFE-25% Carbon T125-C25
NBR 70
NBR 70
NBR 70
FPM 75
FPM 75
RS91
Asymmetrical, single acting rod seal, designed with interference of the preload element on the OD and slight interference of the glide ring on the ID. High pressure force because of a machined rubber preload element. Less relative movement of the rubber part compared to an O-Ring giving the seal a higher wear resistance. NBR 85Excellent sealing performance in low and high speeds. Suitable for positioning functions. Negligible tendency to “stick-slip” effect, good sliding properties. Low break-away load after long standstills. Excellent gap extrusion resistance due to the free space on the trailing side. Can be used in grooves where no O-Ring is possible.
-30°C to +105°C
-30°C to +105°C
-60°C to +80°C
-20°C to +210°C
-20°C to +210°C
10 m/s
10 m/s
10 m/s
10 m/s
10 m/s
250 bar/3600 psi
400 bar/5800 psi
400 bar/5800 psi
400 bar/5800 psi
400 bar/5800 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
UHMWPE
PTFE T101-W
PTFE-25% Carbon T125-C25
NBR 85
NBR 85
FPM 85
FPM 85
RS91B
Asymmetrical, single acting rod seal, designed with interference of the preload element on the OD and slight interference of the glide ring on the ID. High pressure force because of a machined rubber preload element. Less relative movement of the rubber part compared to an O-Ring giving the seal a higher wear resistance. NBR 85Excellent sealing performance in low and high speeds. Suitable for positioning functions. Negligible tendency to “stick-slip” effect, good sliding properties. Low break-away load after long standstills. Excellent gap extrusion resistance due to the free space on the trailing side. Can be used in grooves where no O-Ring is possible.
-30°C to +105°C
-30°C to +105°C
-60°C to +80°C
-20°C to +210°C
-20°C to +210°C
10 m/s
10 m/s
10 m/s
10 m/s
10 m/s
250 bar/3600 psi
400 bar/5800 psi
400 bar/5800 psi
400 bar/5800 psi
400 bar/5800 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
UHMWPE
PTFE T101-W
PTFE-25% Carbon T125-C25
NBR 85
NBR 85
FPM 85
FPM 85
RS16
Asymmetrical, single acting rod seal. Long sealing lip compensates for radial inaccuracy or eccentricity. Useable for long stroke lengths. Low break-away load after long standstills. Seal design tends to “stick-slip” effect.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
150 bar/2200 psi
150 bar/2200 psi
150 bar/2200 psi
150 bar/2200 psi
150 bar/2200 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
RS17
Asymmetrical, single acting rod seal, designed with interference on the OD which provides a good static fit in the groove. Dynamic sealing lip shorter than static lip to avoid drag pressure. Secondary lip for stabilising at large seal heights and reducing the residual oil film. Excellent static and dynamic sealing performance. Useable for long stroke lengths. Negligible tendency to “stick-slip” effect above a speed of 0.15 m/s.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
400 bar/5800 psi
400 bar/5800 psi
150 bar/2200 psi
150 bar/2200 psi
150 bar/2200 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
RS17A
Asymmetrical, single acting rod seal, designed with interference on the OD which provides a good static fit in the groove. Dynamic sealing lip shorter than static lip to avoid drag pressure. Secondary lip for stabilising at large seal heights and reducing the residual oil film. Activated back-up ring prevents and reduces gap extrusion. Excellent static and dynamic sealing performance. Useable for long stroke lengths. Negligible tendency to “stick-slip” effect above a speed of 0.15 m/s.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
700 bar/10.000 psi
700 bar/10.000 psi
300 bar/4300 psi
300 bar/4300 psi
300 bar/4300 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
POM P101-WE
POM P101-WE
POM P101-WE
PEEK PK100-CN
PEEK PK100-CN
RS17B
Asymmetrical, single acting rod seal, designed with interference on the OD which provides a good static fit in the groove. Dynamic sealing lip shorter than static lip to avoid drag pressure. Increased preload due to an additional O-Ring. Secondary lip for stabilising at large seal heights and reducing the residual oil film. Excellent static and dynamic sealing performance. Excellent performance in all pressure ranges. No reverse leakage when changing direction. Recommended for positioning or holding under pressure.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
400 bar/5800 psi
400 bar/5800 psi
150 bar/2200 psi
150 bar/2200 psi
150 bar/2200 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
NBR 70
NBR 70
NBR 70
FPM 75
FPM 75
RS17C
Asymmetrical, single acting rod seal, designed with interference on the OD which provides a good static fit in the groove. Dynamic sealing lip shorter than static lip to avoid drag pressure. Increased preload due to an additional O-Ring. Activated back-up ring prevents and reduces extrusion. Secondary lip for stabilising at large seal heights and reducing the residual oil film. Excellent static and dynamic sealing performance. Excellent performance in all pressure ranges. No reverse leakage when changing direction. Recommended for positioning or holding under pressure.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
700 bar/10.000 psi
700 bar/10.000 psi
300 bar/4300 psi
300 bar/4300 psi
300 bar/4300 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
POM P101-WE NBR 70
POM P101-WE NBR 70
POM P101-WE NBR 70
PEEK PK100-CN FPM 75
PEEK PK100-CN FPM 75