PRS06
Symmetrical, single acting piston/rod seal. Excellent static and dynamic sealing performance. Excellent performance in low pressure conditions. Useable for long stroke lengths. Negligible tendency to “stick-slip” effect above a speed of 0.15 m/s.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
400 bar/5800 psi
400 bar/5800 psi
150 bar/2200 psi
150 bar/2200 psi
150 bar/2200 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
PRS06A
Symmetrical, single acting piston/rod seal. Wider groove and softer lips compared to PRS06. Excellent static and dynamic sealing performance. Excellent performance in low pressure conditions. Useable for long stroke lengths. Negligible tendency to “stick-slip” effect above a speed of 0.15 m/s.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
160 bar/2300 psi
160 bar/2300 psi
160 bar/2300 psi
160 bar/2300 psi
160 bar/2300 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
PRS06B
Symmetrical, single acting piston/rod seal. Good static and dynamic sealing performance. Good performance in low pressure conditions. NBR 85 N107-85Useable for long stroke lengths. Out-of date profile machinery. Poor sealing that causes a relative thick oil film.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
400 bar/5800 psi
400 bar/5800 psi
150 bar/2200 psi
150 bar/2200 psi
150 bar/2200 psi
PU 57 MoS2 Grey U203-GM95
150 bar/2200 psi
HNBR 85 HN112-B85
FPM 85 F109-BR85
PRS06C
Symmetrical, single acting piston/rod seal. Special design for small cross sections where lips would be too thin. Excellent static and dynamic sealing performance. Excellent performance over all pressure ranges. Used for short pulsating strokes. No reverse leakage when changing direction. Recommended for positioning or holding under pressure. Particularly suitable for high viscosity media.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
400 bar/5800 psi
400 bar/5800 psi
150 bar/2200 psi
150 bar/2200 psi
150 bar/2200 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
PRS06D
Symmetrical, single acting piston/rod seal. Special design with wider groove for large cross sections. Excellent static and dynamic sealing performance. Excellent performance in low pressure conditions. Useable for long stroke lengths. Negligible tendency to “stick-slip” effect above a speed of 0.15 m/s.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
400 bar/5800 psi
400 bar/5800 psi
150 bar/2200 psi
150 bar/2200 psi
150 bar/2200 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
PRS06E
Symmetrical, single acting piston/rod seal. Axial stabilisation of the seal by means of an additional land. Excellent static and dynamic sealing performance. Excellent performance in low pressure conditions. Useable for long stroke lengths. Negligible tendency to “stick-slip” effect above a speed of 0.15 m/s.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
400 bar/5800 psi
400 bar/5800 psi
150 bar/2200 psi
150 bar/2200 psi
150 bar/2200 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
PRS07
Symmetrical, single acting piston/rod seal. Increased preload due to an additional O-Ring. Excellent static and dynamic sealing performance. Excellent performance in low pressure conditions. Used for short pulsating strokes. No reverse leakage when changing direction. Recommended for positioning or holding under pressure.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
400 bar/5800 psi
400 bar/5800 psi
400 bar/5800 psi
150 bar/2200 psi
150 bar/2200 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
NBR 70
NBR 70
NBR 70
NBR 70
NBR 70
PRS10SP
Variable support ring for vee packings PRS10-12 Excellent static and dynamic sealing performance. Excellent performance in high pressure conditions. Useable for short and long stroke lengths. High wear resistance.
-60°C to +100°C
-200°C to +80°C
-200°C to +260°C
-50°C to +250°C
Contact us
Contact us
Contact us
Contact us
Contact us
Contact us
Contact us
Contact us
POM P101-WE NBR 70
UHMWPE
PTFE-25% Carbon T125-C25
PEEK PK100-CN FPM75
PRS10-12
Symmetrical, single acting piston/rod seal, combined with pressure ring and support ring. By adjusting the number of packings friction and leakage characteristics can be influenced. Excellent static and dynamic sealing performance. Excellent performance in high pressure conditions. Useable for short and long stroke lengths. High wear resistance.
-30°C to +105°C
-200°C to +260°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
500 bar/7200 psi
500 bar/7200 psi
300 bar/4300 psi
300 bar/4300 psi
300 bar/4300 psi
PU Red U203-95
PTFE-25% Carbon T125-C25
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
POM P101-WE NBR 70
PEEK PK100-CN FPM 75
POM P101-WE NBR 70
PEEK PK100-CN
PEEK PK100-CN
PRS13-15
Symmetrical, single acting piston/rod seal, combined with pressure ring and support ring. By adjusting the number of packings friction and leakage characteristics can be influenced. Excellent static and dynamic sealing performance. Excellent performance in high pressure conditions. Useable for short and long stroke lengths. Reduced friction compared to PRS10-12 profile especially in the high pressure range.
-30°C to +105°C
-200°C to +260°C
-25°C to +100°C
-25°C to +150°C
-20°C to + 210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
500 bar/7200 psi
500 bar/7200 psi
300 bar/4300 psi
300 bar/4300 psi
300 bar/4300 psi
PU Red U203-95
PTFE-25% Carbon T125-C25
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
POM P101-WE NBR 70
PEEK PK100-CN
POM P101-WE NBR 70
PEEK PK100-CN
PEEK PK100-CN
PRS18
Symmetrical, single acting piston/rod seal, no interference on the ID or OD. Increased preload due to an additional O-Ring. Sharp lips for use in high viscosity media. Excellent static and dynamic sealing performance. Good performance in all pressure ranges. Used for short pulsating strokes. No reverse leakage when changing direction. Recommended for positioning or holding under pressure.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
400 bar/5800 psi
400 bar/5800 psi
150 bar/2200 psi
150 bar/2200 psi
150 bar/2200 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
NBR70
NBR70
NBR70
FPM75
FPM75
PRS19B
Symmetrical, single acting piston/rod seal, no interference on the ID or OD. Preload effected through round Helicoil-spring which ensures high pressure on the sealing edges. Excellent static and dynamic sealing performance. Excellent sealing performance in low and high pressure ranges. Useable for short and long stroke lengths. Low friction in dry running or poor lubrication conditions. Also used for gas applications. Negligible tendency to “stick-slip” effect, small break away loads.
-200°C to +80°C
-200°C to +260°C
-200°C to +260°C
-200°C to +260°C
5 m/s
5 m/s
5 m/s
5 m/s
* (0.1 m/s
rotating)
* 150 bar/2200 psi
* 150 bar/2200 psi
* 150 bar/2200 psi
* 150 bar/2200 psi
UHMWPE
PTFE T101-W
PTFE-40% Bronze T120-BR40
PTFE-25% Carbon T125-C25
PRS19C
Symmetrical, single acting piston/rod seal, no interference on the ID or OD. Preload effected through Helicoil-spring which ensures high pressure on the rounded sealing lips.. Excellent static and dynamic sealing performance. Excellent sealing performance in low and high pressure ranges. Useable for short and long stroke lengths. Low friction in dry running or poor lubrication conditions. Also used for gas applications. Negligible tendency to “stick-slip” effect, small break away loads.
-200°C to +80°C
-200°C to +260°C
-200°C to +260°C
-200°C to +260°C
5 m/s
5 m/s
5 m/s
5 m/s
* (0.1 m/s
rotating)
* 150 bar/2200 psi
* 150 bar/2200 psi
* 150 bar/2200 psi
* 150 bar/2200 psi
UHMWPE
PTFE T101-W
PTFE-40% Bronze T120-BR40
PTFE-25% Carbon T125-C25
PRS19D
Symmetrical, single acting piston/rod seal, no interference on the ID or OD. Preload effected through round Helicoil-spring which ensures high pressure on the sealing edges. Excellent static and dynamic sealing performance. Excellent sealing performance in low and high pressure ranges. Useable for short and long stroke lengths. Low friction in dry running or poor lubrication conditions. Negligible tendency to “stick-slip” effect, small break away loads.
-200°C to +80°C
-200°C to +260°C
-200°C to +260°C
-200°C to +260°C
2 m/s
2 m/s
2 m/s
2 m/s
200 bar/2900 psi
200 bar/2900 psi
200 bar/2900 psi
200 bar/2900 psi
UHMWPE
PTFE T101-W
PTFE-40% Bronze T120-BR40
PTFE-25% Carbon T125-C25
PRS22
Symmetrical, single acting piston/rod seal, no interference on the ID or OD. Stabilisation of the sealing ring by an additional retainer ring. Excellent static and dynamic sealing performance. Excellent performance in low pressure conditions. Useable for long stroke lengths. Negligible tendency to “stick-slip” effect above a speed of 0.15 m/s.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
400 bar/5800 psi
400 bar/5800 psi
150 bar/2200 psi
150 bar/2200 psi
150 bar/2200 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
POM P101-WE NBR 70
PEEK PK100-CN FPM 75
POM P101-WE NBR 70
PEEK PK100-CN
PEEK PK100-CN
PRS99
Variable pressure ring for vee packings PRS10-12 Excellent static and dynamic sealing performance. Excellent performance in high NBR 70pressure conditions. Useable for short and long stroke lengths. High wear resistance.
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
400 bar/5800 psi
150 bar/2200 psi
150 bar/2200 psi
150 bar/2200 psi
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
NBR 70
FPM 85
FPM 85