PS08F
Symmetrical, double acting piston seal, designed with interference of the O-Ring on the ID and slight interference of the glide ring on the OD. Glide ring is made from very wear resistant hard grade polyurethane. Excellent sealing performance in low and high speeds. Suitable for positioning and holding functions. Negligible tendency to “stick-slip” effect. Low break-away load after long standstills. Good extrusion resistance.
-30°C to +105°C
-30°C to +105°C
-60°C to +80°C
-20°C to +210°C
-20°C to +210°C
1 m/s
1 m/s
1 m/s
1 m/s
1 m/s
250 bar/3600 psi
250 bar/3600 psi
250 bar/3600 psi
250 bar/3600 psi
250 bar/3600 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
UHMWPE
PTFE T101-W
PTFE-25% Carbon T125-C25
NBR 70
NBR 70
NBR 70
FPM 75
FPM 75
PS81
Symmetrical, double acting piston seal, designed with interference of the preload element on the ID and slight interference of the glide ring on the OD. High pressure force because of a machined rubber preload element. Less relative movement of the rubber part compared to an O-Ring giving the seal a higher wear resistance. NBR 85Excellent sealing performance in low and high speeds. Suitable for positioning functions. Negligible tendency to “stick-slip” effect, good sliding properties. Low break-away load after long standstills. Excellent extrusion resistance. Can be used in grooves where no O-Ring is possible.
-30°C to +105°C
-30°C to +105°C
-60°C to +80°C
-20°C to +210°C
-20°C to +210°C
2 m/s
2 m/s
2 m/s
2 m/s
2 m/s
250 bar/3600 psi
400 bar/5800 psi
400 bar/5800 psi
400 bar/5800 psi
400 bar/5800 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
UHMWPE
PTFE T101-W
PTFE-25% Carbon T125-C25
NBR 85
NBR 85
FPM 85
FPM 85
PS09
Double acting piston seal, designed with interference on the ID which provides a good static fit in the groove. Consisting of one gliding, one energizing and two guiding/back-up elements. Useable for short and long stroke lengths. Good static and dynamic sealing performance. High frictional force.
-30°C to +105°C
-30°C to +105°C
-30°C to +105°C
0.5 m/s
0.5 m/s
0.5 m/s
400 bar/5800 psi
400 bar/5800 psi
400 bar/5800 psi
PU Red U203-95
PU MoS2 Grey U203-GM95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85 POM P101-WE
NBR 85 N107-85 POM P101-WE
NBR 85 N107-85 POM P101-WE
PS09A
Double acting piston seal, designed with interference on the ID which provides a good static fit in the groove. Consisting of one gliding, one energizing, two back-up and two gide elements. Useable for short and long stroke lengths. Compact piston design possible Good static and dynamic sealing performance. Good positioning control.
-30°C to +105°C
-30°C to +105°C
-30°C to +105°C
0.5 m/s
0.5 m/s
0.5 m/s
400 bar/5800 psi
400 bar/5800 psi
400 bar/5800 psi
PU Red U203-95
PU MoS2 Grey U203-GM95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85 POM P101-WE
NBR 85 N107-85 POM P101-WE
NBR 85 N107-85 POM P101-WE
PS16
Asymmetrical, single acting piston seal. Long sealing lip compensates for radial inaccuracy or eccentricity. Useable for long stroke lengths. Low break-away load after long standstills. Seal design tends to “stick-slip” effect.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
150 bar/2200 psi
150 bar/2200 psi
150 bar/2200 psi
150 bar/2200 psi
150 bar/2200 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
PS16A
Asymmetrical, single acting piston seal. Long sealing lip compensates for radial inaccuracy or eccentricity. Useable for long stroke lengths. Low break-away load after long standstills. Seal design tends to “stick-slip” effect.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
150 bar/2200 psi
150 bar/2200 psi
150 bar/2200 psi
150 bar/2200 psi
150 bar/2200 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
PS17
Double acting piston seal, designed with interference on the ID which provides a good static fit in the groove. Consisting of one sealing and two guiding/back-up elements. Useable for short and long stroke lengths. Good dynamic and static sealing performance. High frictional force.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
700 bar/10.000 psi
700 bar/10.000 psi
300 bar/4300 psi
300 bar/4300 psi
300 bar/4300 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
POM P101-WE NBR 70
POM P101-WE NBR 70
POM P101-WE NBR 70
PEEK PK100-CN FPM 75
PEEK PK100-CN FPM 75
PS17A
Double acting piston seal, designed with interference on the ID which provides a good static fit in the groove. Consisting of one sealing and two guiding/back-up elements. Useable for short and long stroke lengths. Good dynamic and static sealing performance. High frictional force.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
700 bar/10.000 psi
700 bar/10.000 psi
300 bar/4300 psi
300 bar/4300 psi
300 bar/4300 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
POM P101-WE NBR 70
POM P101-WE NBR 70
POM P101-WE NBR 70
PEEK PK100-CN FPM 75
PEEK PK100-CN FPM 75
PS17B
Double acting piston seal, designed with interference on the ID which provides a good static fit in the groove. Consisting of one sealing and two guiding/back-up elements. Two sealing edges on the OD for improved media separation. Useable for short and long stroke lengths. Good dynamic and static sealing performance. High frictional force.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
700 bar/10.000 psi
700 bar/10.000 psi
300 bar/4300 psi
300 bar/4300 psi
300 bar/4300 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
POM P101-WE NBR 70
POM P101-WE NBR 70
POM P101-WE NBR 70
PEEK PK100-CN FPM 75
PEEK PK100-CN FPM 75
PS19
Asymmetrical, single acting piston seal, designed with low interference on the static sealing diameter. Preload effected through V-spring. Dynamic sealing lip shorter than static lip to avoid drag pressure. Excellent static and dynamic sealing performance. Useable for short and long stroke lengths. Low friction in dry running or poor lubrication conditions. Negligible tendency to “stick-slip” effect, small break away loads.
-200°C to +80°C
-200°C to +260°C
-200°C to +260°C
-200°C to +260°C
15 m/s
15 m/s
15 m/s
15 m/s
160 bar/2300 psi
160 bar/2300 psi
160 bar/2300 psi
160 bar/2300 psi
UHMWPE
PTFE T101-W
PTFE-40% Bronze T120-BR40
PTFE-25% Carbon T125-C25
PS19A
Asymmetrical, single acting rotary seal with clamping flange. Preload effected through V-spring. Dynamic sealing lip shorter than static lip to avoid drag pressure. Excellent static and dynamic sealing performance. Useable for short and long stroke lengths. Low friction in dry running or poor lubrication conditions, no stick-slip effect.
-200°C to +80°C
-200°C to +260°C
-200°C to +260°C
-200°C to +260°C
2 m/s
2 m/s
2 m/s
2 m/s
150 bar/2200 psi
150 bar/2200 psi
150 bar/2200 psi
150 bar/2200 psi
UHMWPE
PTFE T101-W
PTFE-40% Bronze T120-BR40
PTFE-25% Carbon T125-C25
PS20
Symmetrical, double acting compact piston seal, designed with interference on the ID which provides a good static fit in the groove. Excellent static and dynamic sealing performance. Excellent performance in high and low pressure conditions. Negligible tendency to “stick-slip” effect. High break-away load after long standstills. Activated back-up rings reduce extrusion and prevent twisting of the seal in the groove.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
700 bar/10.000 psi
700 bar/10.000 psi
700 bar/10.000 psi
700 bar/10.000 psi
700 bar/10.000 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
POM P101-WE NBR 70
POM P101-WE NBR 70
POM P101-WE NBR 70
PEEK PK100-CN FPM 75
PEEK PK100-CN FPM 75
PS23
Double acting piston seal, designed with interference on the ID which provides a good static fit in the groove. Consisting of one gliding, one energizing and two back-up elements. Useable for short and long stroke lengths. Good static and dynamic sealing performance. High frictional force. No drag pressure build-up.
-30°C to +105°C
-30°C to +105°C
-30°C to +105°C
0.5 m/s
0.5 m/s
0.5 m/s
400 bar/5800 psi
400 bar/5800 psi
400 bar/5800 psi
PU Red U203-95
PU MoS2 Grey U203-GM95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85 POM P101-WE
NBR 85 N107-85 POM P101-WE
NBR 85 N107-85 POM P101-WE
PS35
Asymmetrical, double acting compact piston seal, designed with interference on the ID which provides a good static fit in the groove. Excellent static and dynamic sealing performance. Excellent performance in low pressure conditions. For rotary applications the interference on the ID has to be increased (better static fit to reduce the danger of the seal rotating in the housing), the preload has to be reduced (lower friction).
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.4 m/s
0.4 m/s
0.4 m/s
0.4 m/s
0.4 m/s
400 bar/5800 psi
400 bar/5800 psi
150 bar/2200 psi
150 bar/2200 psi
150 bar/2200 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
PRS06
Symmetrical, single acting piston/rod seal. Excellent static and dynamic sealing performance. Excellent performance in low pressure conditions. Useable for long stroke lengths. Negligible tendency to “stick-slip” effect above a speed of 0.15 m/s.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
400 bar/5800 psi
400 bar/5800 psi
150 bar/2200 psi
150 bar/2200 psi
150 bar/2200 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
PRS06A
Symmetrical, single acting piston/rod seal. Wider groove and softer lips compared to PRS06. Excellent static and dynamic sealing performance. Excellent performance in low pressure conditions. Useable for long stroke lengths. Negligible tendency to “stick-slip” effect above a speed of 0.15 m/s.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
160 bar/2300 psi
160 bar/2300 psi
160 bar/2300 psi
160 bar/2300 psi
160 bar/2300 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
PRS06B
Symmetrical, single acting piston/rod seal. Good static and dynamic sealing performance. Good performance in low pressure conditions. NBR 85 N107-85Useable for long stroke lengths. Out-of date profile machinery. Poor sealing that causes a relative thick oil film.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
400 bar/5800 psi
400 bar/5800 psi
150 bar/2200 psi
150 bar/2200 psi
150 bar/2200 psi
PU 57 MoS2 Grey U203-GM95
150 bar/2200 psi
HNBR 85 HN112-B85
FPM 85 F109-BR85
PRS06C
Symmetrical, single acting piston/rod seal. Special design for small cross sections where lips would be too thin. Excellent static and dynamic sealing performance. Excellent performance over all pressure ranges. Used for short pulsating strokes. No reverse leakage when changing direction. Recommended for positioning or holding under pressure. Particularly suitable for high viscosity media.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
400 bar/5800 psi
400 bar/5800 psi
150 bar/2200 psi
150 bar/2200 psi
150 bar/2200 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
PRS06D
Symmetrical, single acting piston/rod seal. Special design with wider groove for large cross sections. Excellent static and dynamic sealing performance. Excellent performance in low pressure conditions. Useable for long stroke lengths. Negligible tendency to “stick-slip” effect above a speed of 0.15 m/s.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
400 bar/5800 psi
400 bar/5800 psi
150 bar/2200 psi
150 bar/2200 psi
150 bar/2200 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
PRS06E
Symmetrical, single acting piston/rod seal. Axial stabilisation of the seal by means of an additional land. Excellent static and dynamic sealing performance. Excellent performance in low pressure conditions. Useable for long stroke lengths. Negligible tendency to “stick-slip” effect above a speed of 0.15 m/s.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
400 bar/5800 psi
400 bar/5800 psi
150 bar/2200 psi
150 bar/2200 psi
150 bar/2200 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85