Is a double acting rod seal. It combines the excellent wear resistance of Kefloy® with the sealing capacity of rubber. It consists of a dynamic sliding ring of Kefloy® furnished with a rubber X-Ring and a rubber O-Ring energizing element. BX-Seal® is pressure responsive. BX-Seal® can be used with a great variety of fluids. Kefloy® is compatible with virtually all fluids. The unique design where an X-Ring is integrated in the sliding ring combines the sealing efficiency of rubber with the wear resistance of Kefloy®.

Is a double acting piston seal. It combines the excellent wear resistance of Kefloy® with the sealing capacity of rubber. It consists of a dynamic sliding ring of Kefloy® furnished with a rubber X-Ring and a rubber O-Ring energizing element. BX-Seal® is pressure responsive. BX-Seal® can be used with a great variety of fluids. Kefloy® is compatible with virtually all fluids. The unique design where an X-Ring is integrated in the sliding ring combines the sealing efficiency of rubber with the wear resistance of Kefloy®.

Is a SINGLE ACTING rod seal. It is basically a U-Cup energized by a rubber O-Ring. C-Cap® is pressure responsive. C-Cap® can be used with a great variety of fluids. Kefloy® is compatible with virtually all fluids.

Is a SINGLE ACTING piston seal. It is basically a U-Cup energized by a rubber O-ring. C-Cap® is pressure responsive. C-Cap® can be used with a great variety of fluids. Kefloy® is compatible with virtually all fluids.

O-Cap® type 2541 is a double acting rod seal. It uses the same groove dimensions as ORings according to British and American standard. It consists of a Kefloy® ring energized by a rubber O-Ring. The O-Cap® is designed to eliminate the frictional – and wear problems, which may occur with rubber O-Rings.

There is a range of O-Caps® for British and American standard O-Rings. O-Cap® is pressure responsive. O-Cap® for American and British standard O-Ring groove for O-Ring with no back-up rings O-Cap® can be used with a great variety of fluids. Kefloy® is compatible with virtually all fluids. O-Cap® is designed to replace rubber O-Rings where they cause frictional – or wear problems. O-Caps® should not be used for new designs

O-Cap® is a double acting piston seal using the same groove dimensions as an O-Ring. It consists of a Kefloy® ring energized by a rubber O-Ring. The O-Cap® is designed to eliminate the frictional – and wear problems, which may occur with rubber O-Rings. O-Cap® is pressure responsive. O-Cap® can be used with a great variety of fluids. Kefloy® is compatible with virtually all fluids. O-Cap® is designed to replace rubber O-Rings where they cause frictional – or wear problems. O-Caps® should not be used for new designs. O-Cap® for British and American standard O-Ring groove for O-Ring with no back-up rings

O-Cap® type 2543- is a double acting rod seal. It uses the same groove dimensions as ORing + 1 Buck-Up Ring according to British and American standard. It consists of a Kefloy® ring energized by a rubber O-Ring. The O-Cap® is designed to eliminate the frictional – and wear problems, which may occur with rubber O-Rings.

O-Cap® is pressure responsive. O-Cap® can be used with a great variety of fluids. Kefloy® is compatible with virtually all fluids. O-Cap® is designed to replace rubber O-Rings where they cause frictional – or wear problems. O-Caps® should not be used for new designs.

O-Cap® type 2544 is a double acting piston seal. It uses the same groove dimensions as ORing + 1 Back-up Ring according to British and American standard. It consists of a Kefloy® ring energized by a rubber O-Ring. The O-Cap® is designed to eliminate the frictional – and wear problems, which may occur with rubber O-Rings. O-Cap® is pressure responsive. O-Cap® can be used with a great variety of fluids. Kefloy® is compatible with virtually all fluids. O-Cap® is designed to replace rubber O-Rings where they cause frictional – or wear problems. O-Caps® should not be used for new designs.

O-Cap® type 2545- is a double acting rod seal. It uses the same groove dimensions as ORing + 2 Buck-Up Rings according to British and American standard. It consists of a Kefloy® ring energized by a rubber O-Ring. The O-Cap® is designed to eliminate the frictional – and wear problems, which may occur with rubber O-Rings.

O-Cap® is pressure responsive. O-Cap® can be used with a great variety of fluids. Kefloy® is compatible with virtually all fluids. O-Cap® is designed to replace rubber O-Rings where they cause frictional – or wear problems. O-Caps® should not be used for new designs.

O-Cap® type 2546- is a double acting piston seal. It uses the same groove dimensions as O-Ring + 2 Back-Up Rings according to British and American standard. It consists of a Kefloy® ring energized by a rubber O-Ring. The O-Cap® is designed to eliminate the frictional – and wear problems, which may occur with rubber O-Rings. O-Cap® is pressure responsive. O-Cap® can be used with a great variety of fluids. Kefloy® is compatible with virtually all fluids. O-Cap® is designed to replace rubber O-Rings where they cause frictional – or wear problems. O-Caps® should not be used for new designs.

O-Cap® type 2551- is a double acting rod seal. It uses the same groove dimensions as ORings according to Swedish and Japanese standard. It consists of a Kefloy® ring energized by a rubber O-Ring. The O-Cap® is designed to eliminate the frictional – and wear problems, which may occur with rubber O-Rings.

O-Cap® is pressure responsive. O-Cap® can be used with a great variety of fluids. Kefloy® is compatible with virtually all fluids. O-Cap® is designed to replace rubber O-Rings where they cause frictional – or wear problems. O-Caps® should not be used for new designs.

O-Cap® type 2552- is a double acting piston seal. It uses the same groove dimensions as O-Rings according to Swedish and Japanese standard. It consists of a Kefloy® ring energized by a rubber O-Ring. The O-Cap® is designed to eliminate the frictional – and wear problems, which may occur with rubber O-Rings. O-Cap® is pressure responsive. O-Cap® can be used with a great variety of fluids. Kefloy® is compatible with virtually all fluids. O-Cap® is designed to replace rubber O-Rings where they cause frictional – or wear problems. O-Caps® should not be used for new designs.

O-Cap® type 2553- is a double acting rod seal. It uses the same groove dimensions as ORing +1 Back-Up Ring according to Swedish and Japanese standard. It consists of a Kefloy® ring energized by a rubber O-Ring. The O-Cap® is designed to eliminate the frictional – and wear problems, which may occur with rubber O-Rings.

O-Cap® is pressure responsive. O-Cap® can be used with a great variety of fluids. Kefloy® is compatible with virtually all fluids. O-Cap® is designed to replace rubber O-Rings where they cause frictional – or wear problems. O-Caps® should not be used for new designs.

O-Cap® type 2554- is a double acting piston seal. It uses the same groove dimensions as ORing + 1 Back-Up Ring according to Swedish and Japanese standard. It consists of a Kefloy® ring energized by a rubber O-Ring. The O-Cap® is designed to eliminate the frictional – and wear problems, which may occur with rubber O-Rings. O-Cap® is pressure responsive. O-Cap® can be used with a great variety of fluids. Kefloy® is compatible with virtually all fluids. O-Cap® is designed to replace rubber O-Rings where they cause frictional – or wear problems. O-Caps® should not be used for new designs.

O-Cap® type 2555- is a double acting rod seal. It uses the same groove dimensions as ORing +2 Back-Up Ring according to Swedish and Japanese standard. It consists of a Kefloy® ring energized by a rubber O-Ring. The O-Cap® is designed to eliminate the frictional – and wear problems, which may occur with rubber O-Rings.

O-Cap® is pressure responsive. O-Cap® can be used with a great variety of fluids. Kefloy® is compatible with virtually all fluids. O-Cap® is designed to replace rubber O-Rings where they cause frictional – or wear problems. O-Caps® should not be used for new designs.

O-Cap® type 2556- is a double acting piston seal. It uses the same groove dimensions as ORing + 2 Back-Up Rings according to Swedish and Japanese standard. It consists of a Kefloy® ring energized by a rubber O-Ring. The O-Cap® is designed to eliminate the frictional – and wear problems, which may occur with rubber O-Rings. O-Cap® is pressure responsive. O-Cap® can be used with a great variety of fluids. Kefloy® is compatible with virtually all fluids. O-Cap® is designed to replace rubber O-Rings where they cause frictional – or wear problems. O-Caps® should not be used for new designs.

Is a double acting rod seal. It combines the excellent wear resistance of Kefloy® with the sealing capacity of rubber. It consists of a dynamic sliding ring of Kefloy® furnished with a rubber X-Ring and two rubber O-Ring energizing elements. OX-Seal® is pressure responsive. OX-Seal® can be used with a great variety of fluids. Kefloy® is compatible with virtually all fluids. The unique design where an X-Ring is integrated in the sliding ring combines the sealing efficiency of rubber with the wear resistance of Kefloy®.

Is a double acting piston seal. It combines the excellent wear resistance of Kefloy® with the sealing capacity of rubber. It consists of a dynamic sliding ring of Kefloy® furnished with a rubber X-Ring and two rubber O-Ring energizing elements. OX-Seal® is pressure responsive. OX-Seal® can be used with a great variety of fluids. Kefloy® is compatible with virtually all fluids. The unique design where an X-Ring is integrated in the sliding ring combines the sealing efficiency of rubber with the wear resistance of Kefloy®.

Is a very efficient SINGLE ACTING rod seal. The design of the seal concentrates the sealing forces on the sealing edge. This ensures an excellent leakage control over the whole pressure range. The sealing edge virtually scrapes the sealing surface dry. Where a completely dry sealing surface is required, it is possible to install SharpSeals® in tandem. The SharpSeal® ensures automatic pressure relief between the two seals. Ventilation between the seals is not necessary. SharpSeal® consists of an outer sliding part of Kefloy® energized by a rubber O-Ring. SharpSeal® is pressure responsive. SharpSeal® can be used with a great variety of fluids. Kefloy® is compatible with virtually all fluids. SharpSeal® type 2611- is available in a Standard series, a Light Duty series, and a Heavy Duty series.

Is a very efficient SINGLE ACTING piston seal. The design of the seal concentrates the sealing forces on the sealing edge. This ensures an excellent leakage control over the whole pressure range. The sealing edge virtually scrapes the sealing surface dry. Where a completely dry sealing surface is required, it is possible to install SharpSeals® in tandem. The SharpSeal® ensures automatic pressure relief between the two seals. Ventilation between the seals is not necessary. SharpSeal® consists of an outer sliding part of Kefloy® energized by a rubber O-Ring. SharpSeal® is pressure responsive. SharpSeal® can be used with a great variety of fluids. Kefloy® is compatible with virtually all fluids. SharpSeal® type 2512- is available in Standard series, Light Duty series and Heavy Duty series.

Is a double acting rod seal consisting of an outer sliding part of Kefloy® energized by a rubber O-Ring. SlipRing® is pressure responsive. SlipRing® can be used with a great variety of fluids. Kefloy® is compatible with virtually all fluids. To avoid extrusion and ease installation SlipRing® type 2521- is chamfered. SlipRing® type 2521- is available in a Standard series, a Light Duty series, and a Heavy Duty series.

Is a double acting piston seal consisting of an outer sliding part of Kefloy® energized by a rubber O-Ring. SlipRing® is pressure responsive. SlipRing® can be used with a great variety of fluids. Kefloy® is compatible with virtually all fluids. To avoid extrusion and ease installation SlipRing® type 2522- is chamfered. SlipRing® type 2522- is available in Standard series, Light Duty series and Heavy Duty series.

Is a double acting rod seal consisting of an outer sliding part of Kefloy® energized by a rubber O-Ring. SlipRing® is pressure responsive. SlipRing® can be used with a great variety of fluids. Kefloy® is compatible with virtually all fluids. SlipRing® type 2631- is available in a Standard series, a Light Duty series, and a Heavy Duty series.

Is a double acting piston seal consisting of an outer sliding part of Kefloy® energized by a rubber O-Ring. SlipRing® is pressure responsive. SlipRing® can be used with a great variety of fluids. Kefloy® is compatible with virtually all fluids. SlipRing® type 2532- is available in Standard series, Light Duty series and Heavy Duty series.

Is a double acting rod seal consisting of an outer sliding part of Kefloy® energized by a rubber O-Ring. SlipRing® is pressure responsive. SlipRing® can be used with a great variety of fluids. Kefloy® is compatible with virtually all fluids. SlipRing type 2533- is an old design and should not be used for new constructions.

Is a double acting piston seal consisting of an outer sliding part of Kefloy® energized by a rubber O-Ring. SlipRing® is pressure responsive. SlipRing® can be used with a great variety of fluids. Kefloy® is compatible with virtually all fluids. SlipRing® type 2534- is an old design and should not be used for new constructions.

Is a double acting rod seal consisting of an outer sliding part of Kefloy® energized by a rubber O-Ring. SlipRing® A is pressure responsive. SlipRing® A can be used with a great variety of fluids. Kefloy® is compatible with virtually all fluids. To avoid extrusion SlipRing® A type 2611- is furnished with a special chamfer. SlipRing® A type 2611- is available in a Standard series, a Light Duty series, and a Heavy Duty series.

Is a double acting piston seal consisting of an outer sliding part of Kefloy® energized by a rubber O-Ring. SlipRing® A is pressure responsive. SlipRing® A can be used with a great variety of fluids. Kefloy® is compatible with virtually all fluids. To avoid extrusion SlipRing® A type 2612- is furnished with a special chamfer. SlipRing® A type 2612- is available in Standard series, Light Duty series and Heavy Duty series.

Is a double acting shaft seal for rotating applications. TurnRing® consists of a dynamic seal ring of Kefloy®; energized by a rubber O-Ring. The sliding surface of the Kefloy® ring is furnished with one or two grooves (depending on series). The grooves ensure good lubrication and reduce friction. The rear face of the Kefloy® ring has a concave shape. This ensures a good contact to the O-Ring and prevents the seal from turning with the shaft. The seal design ensures an efficient leakage control over the entire pressure range from 0 to 30 MPa. The non stick-slip properties of the Kefloy® compounds ensure a smooth operation. The small installation dimensions allow a compact design of the hardware. This is a major advantage in e.g. swivel joints with many ports. TurnRing® is pressure responsive and is available in Standard series, Light Duty series and Heavy Duty series.

Is a double acting piston seal for rotating applications. TurnRing® consists of a dynamic seal ring of Kefloy®; energized by a rubber O-Ring. The sliding surface of the Kefloy® ring is furnished with one or two grooves (depending on series). The grooves ensure good lubrication and reduce friction. The rear face of the Kefloy® ring has a concave shape. This ensures a good contact to the O-Ring and prevents the seal from turning with the piston. The seal design ensures an efficient leakage control over the entire pressure range from 0 to 30 MPa. The non stick-slip properties of the Kefloy® compounds ensure a smooth operation. The small installation dimensions allow a compact design of the hardware. This is a major advantage in e.g. swivel joints with many ports. TurnRing® is pressure responsive. TurnRing® is available in Standard series, Light Duty series and Heavy Duty series.

Is a highly efficient double acting scraper. It consists of a scraping ring with one external and one internal scraping lip plus an O-ring. The O-Ring ensures a firm contact between the scraping lips and the piston rod. The external scraping lip wipes the retracting piston rod free from all kinds of dirt, mud, ice etc. The internal lip retains the residual oil film, which may pass under the rod seal.

Is a highly efficient single acting scraper. It consists of a scraping ring of Kefloy® plus a rubber O-ring. The O-Ring ensures a firm contact between the scraping lip and the piston rod.

Is a highly efficient double acting scraper. It consists of a scraping ring with one external and one internal scraping lip plus an O-ring. The O-Ring ensures a firm contact between the scraping lips and the piston rod. The external scraping lip wipes the retracting piston rod free from all kinds of dirt, mud, ice etc. The internal lip retains the residual oil film, which may pass under the rod seal. WypeRing® 2 Type 2563- is designed to replace WypeRing® Type 2561- where a double acting WypeRing® is preferred. For new constructions we recommend to use WypeRing® 5 Type 2565.